881 UNIVERSAL PROJECTOR CEILING MOUNT FLUSH
Mounts the projector only 9cm from the ceiling, allowing for full 360º swivel & up to 90º tilt. This mount is designed for LCD & DLP projectors.
An ultra flexible carousel mounting system designed to fit virtually all LCD & DLP projectors. This mount includes 4 long arms & 4 short arms
that branch out from the carousel disc giving a maximum distance between any two projector mounting points of 340mm. Any combination
of arms can be used. The hardware kit includes M4, M5 & M6. fixing screws plus metal spacers for uneven mounting surfaces or recessed
holes on the projectors. Having the arms raised allows for open-air circulation giving a longer projector bulb life. The arms can be adjusted
by using the thumbwheels & this allows the possiblity of replacing bulbs without the need of taking down the projector.
A sleek cover plate hides the fixing screws from view whilst a strong safety wire is included as standard for extra security.
Maximum Load of 10kgs. Available in Silver & White. $ 239.95 GST Included.
882 UNIVERSAL PROJECTOR CEILING MOUNT SHORT
This mount is designed for LCD & DLP projectors There is also full 360º swivel & up to 90º tilt.with a variable ceiling drop 500 - 750mm which
can be adjusted by simply loosening the lever & then tightening.A tilt facility at the ceiling allows this mount to be used on angled / cathedral
ceilings. Cables can be routed through the inside of the tube (lower section 35mm dia, upper 42mm) An ultra flexible carousel mounting
system designed to fit virtually all LCD & DLP projectors. This mount includes 4 long arms & 4 short arms that branch out from the carousel
discgiving a maximum distance between any two projector mounting points of 340mm. Any combination of arms can be used, the hardware
kit includes M4, M5 & M6 fixing screws plus metal spacers for uneven mounting surfaces or recessed holes on the projectors. Having the arms
raised allows for open-air circulation giving a longer projector bulb life. The arms can be adjusted by using the thumbwheels & this allows the
possiblity of replacing bulbs without the need of taking down the projector. A sleek cover plate hides the fixing screws from view whilst a strong
safety wire is included as standard for extra security.
Maximum Load 10kgs. Available in Silver. $ 349.95 GST Included.
883 UNIVERSAL PROJECTOR CEILING MOUNT LONG
This mount is designed for LCD & DLP projectors There is also full 360º swivel & up to 90º tilt.with a variable ceiling drop 750 - 1222mm which can
be adjusted by simply loosening the lever & then tightening. A tilt facility at the ceiling allows this mount to be used on angled / cathedral ceilings.
Cables can be routed through the inside of the tube (lower section 35mm dia, upper 42mm). An ultra flexible carousel mounting system designed
to fit virtually all LCD and DLP projectors. This mount includes 4 long arms & 4 short arms that branch out from the carousel disc giving a
maximum distance between any two projector mounting points of 340mm. Any combination of arms can be used, the hardware kit includes
M4, M5 & M6 fixing screws plus metal spacers for uneven mounting surfaces or recessed holes on the projectors. Having the arms raised allows
for open-air circulation giving a longer projector bulb life. The arms can be adjusted by using the thumbwheels and this allows the possiblity of
replacing bulbs without the need of taking down the projector. A sleek cover plate hides the fixing screws from view whilst a strong safety wire is
included as standard for extra security.
Maximum Load 10kgs. Available in Silver. $ 399.95 GST Included.
889 AVIBALL PROJECTOR CEILING MOUNT
Universal mount to fit LCD / DLP projectors. Unique carousel mount for a
simple installation Comprehensive fixing kit supplied. Maximum distance
between any 2 mounting points. Supplied with cover plates suitable for
projectors using M3, M4, M5 and M6 fixings Low profile arm design
125mm. Drop from ceiling easy touch tilt & swivel - 37º in any direction.
Maximum Load 15kgs. Available in Silver.
$ 249.95 GST Included.
PROJECTOR BRACKETS
Wall & Ceiling
SCROLL DOWN TO VIEW PRODUCTS
885 PROJECTOR WALL ARM KIT
Designed to wall mount projectors. Adjustable distance from the wall to centre
of ball joint: 110mm - 360mm. Maximum distance between any 2 fixing points: 340mm.
Quick release and simple hook-on installation with all mounting hardware included.
Coverplate included for smart installation. Unique carousel mount for simple installation
with all mounting hardware included. Suitable for projectors using M3, M4, M5 and M6 fixings.
Tilt and Swivel: 37° (in any direction). Projector can be inverted. Cable management slot allows cables to pass through.
Maximum Load 15kgs. Available in Black & Silver. $ 399.95 GST Included.
Image Brackets
Copyright 2007 Image Brackets All Rights Reserved
7819 - 888 QUICK RELEASE PROJECTOR MOUNT
Universal project mount suitable for LCD/DLP projectors. Finger screws allow projector & mount to be quickly disassembled & removed
(no tools required) from ceiling mount and stored safely away. Alternate locking screws provided for permanent installation. Includes low profile
carousel mount. Coverplate included. AVIBALL arm allows projector to smoothly rotate 37º in any direction. Simple installation -
All mounting hardware included. Maximum Load 15kgs. (33lbs). Available in Black. $ 249.95 GST Included.
